================================================================================ Note 5.0 Q22 Compatible Options No replies JAWS::KAISER 319 lines 25-MAR-1985 09:15 -------------------------------------------------------------------------------- +---------------+ +-----------------+ | d i g i t a l | | uNOTE # 005 | +---------------+ +-----------------+ +----------------------------------------------------+-----------------+ | Title: Q22 Compatible Options | Date: 23-Apr-84 | +----------------------------------------------------+-----------------+ | Originator: Charlie Giorgetti | Page 1 of 6 | +----------------------------------------------------+-----------------+ This is a list of Q22 compatible options. A Q22 compatible option is defined as a Q-bus option that will work without restriction in an extended Q-bus system, that is a 22-bit Q-bus system. This list also includes options that are not compatible in Q22 systems and the reason for the restriction. The requirements for a device to be Q22 compatible are the following: 1. Processors, memories, and DMA devices must all be capable of 22-bit addressing. 2. Devices must use backplane pins BC1, BD1, BE1, BF1 and DC1, DD1, DE1, DF1, for BDAL18-21 only. Processors, memories, or DMA devices which are not capable of 22-bit addressing may generate or decode erroneous addresses if they are used in systems which implement 22-bit addressing. Memory and memory-addressing devices which implement only 16 or 18-bit addressing may be used in a 22-bit backplane, but the size of the system memory must be restricted to the address range of those devices (64 KB for systems with 16-bit devices and 256 KB for systems with an 18-bit devices). Any device which uses backplane pins BC1, BD1, BE1, BF1 or DC1, DD1, DE1, DF1, for purposes other than BDAL18-21 is electrically incompatible with the 22-bit bus and may not be used without modification. NOTE Eighteen or sixteen bit DMA devices can potenitially work in Q22 systems by buffering I/O in the 18- or 16-bit address space. I. Fully Compatible Options Options in this category meet both of the requirements mentioned above and may be used in any Q-bus configuration. A. Processors KD32-A M7135/M7136 MicroVAX I CPU Module KDF11-A M8186 LSI-11/23 CPU (Etch Rev. C or later) Page 2 KDF11-B M8189 LSI-11/23B CPU KDJ11-A M8192 LSI-11/73 CPU KDJ11-B M8190 MicroPDP-11/73 CPU KXT11-C M8377 Q-bus Perpherial I/O Processor KMV11-A M7500 Q-bus Perpherial Communication Processor B. Backplanes/Boxes H9270-Q 4 X 4 Q22/Q22 Backplane H9281-QA 2 X 4 Q22 Dual-height Backplane H9281-QB 2 X 8 Q22 Dual-height Backplane H9281-QC 2 X 12 Q22 Dual-height Backplane H9275 4 X 9 Q22/Q22 Backplane BA11-S H9276 4 X 9 Q22/CD Backplane Micro/PDP-11 H9278 4 X 3 Q22/CD and 4 X 5 Q22/Q22 Backplane C. Memory MCV11-D M8631 CMOS Non-volatile Memory MSV11-L M8059 MOS Memory (either 128 KB or 256 KB) MSV11-P M8067 MOS Memory (either 256 KB or 512 KB) MSV11-Q M7551 MOS Memory (1 MB) MXV11-B M7195 Multifunction Module MRV11-D M8578 PROM/ROM Module D. Options AAV11-C A6006 D/A Converter ADV11-C A8000 A/D Converter AXV11-C A0026 D/A and A/D Combination Converter BDV11 M8012 Bootstrap, Terminator, Diagnostic (CS Rev. E or later, ECO M8012-ML005 installed) DEQNA M7504 Ethernet Controller DLV11 M7940 Asynchronous Serial Line Interface Page 3 DLV11-E M8017 Asynchronous Serial Line Interface DLV11-F M8028 Asynchronous Serial Line Interface DLV11-J M8043 Four Asynchronous Serial Line Interfaces (CS Rev. E or later, ECO M8043-MR002 installed) DHV11 M3104 8-line Asynchronous EIA Multiplexer DMV11-AD M8053-MA Synchronous Communications Interface DMV11-AF M8064-MA Synchronous Communications Interface DPV11 M8020 Programmable Synchronous EIA Line DRV11 M7941 32 line Parallel Interface DRV11-J M8049 64 line Parallel Interface DRV11-W M7651 General Purpose DMA Interface (dual) DUV11 M7951 Programmable Synchronous EIA Line DZQ11 M3106 4-line Asynchronous EIA Multiplexer (dual) DZV11 M7957 4-line Asynchronous EIA Multiplexer (quad) FPF11 M8188 Floating Point Processor IBV11-A M7954 IEEE Instrument Bus Interface IEQ11 M8634 DMA IEEE Instrument Bus Interface KLESI-QA M7740 LESI Bus Adaptor (RC25 Interface) KPV11-A M8016 Power-fail and LTC Generator (KPV11-B and -C are not compatible) KWV11-C A4002 Programmable Real-time Clock LAV11 M7949 LA180 Line Printer Interface LPV11 M8027 LA180/LP05 Printer Interface RLV12 M8061 RL01/2 Controller RQDX1 M8639 Controller for 5.25" Floppy and Winchester RXV11 M7946 RX01 Floppy Disk Interface TQK25 M7605 Streaming Cartridge Tape Controller TSV05 M7196 Magnetic Tape Controller Page 4 E. Bus Cable-Cards M9404 Cable Connector M9404-YA Cable Connector with 240-Ohm Terminators M9405 Cable Connector M9405-YA Cable Connector with 120-Ohm Terminators II. Restricted Compatibility Options Options in this category do not meet one or both of the requirements for use in a 22-bit system. These options are incompatible with some or all 22-bit systems. A. Processors KDF11-A M8186 LSI-11/23 CPU (Prior to etch rev. C, 18-bit addressing only, and use of BC1,BD1,BE1,BF1 for purposes other than BDAL18-21) KD11-HA M7270 LSI-11/2 CPU (16-bit addressing only, and use of BC1,BD1, BE1,BF1 for purposes other than BDAL18-21) KD11-F M7264 LSI-11 CPU (16-bit addressing only, and use of DC1,DB1, DE1,DF1 for purposes other than BDAL18-21) KXT11-A M8063 SBC-11/21 CPU (16-bit addressing only) B. Backplanes/Boxes DDV11-B 6 X 9 Backplane (18-bit addressing only) BA11-M H9270 4 X 4 Backplane (18-bit addressing only) BA11-N H9273-A 4 X 9 Backplane (18-bit addressing only) BA11-VA H9281-A,B,C 2 X n Dual-height Backplane n = 4, 8, and 12 BA11-VA used the H9281-A (18-bit addressing only) VT103 4 X 4 Backplane (part number: 54-14008) (18-bit addressing only) Page 5 C. Memories MMV11-A G653 8 KB Core Memory (16-bit addressing only, Q-bus required on C/D backplane connectors) MRV11-AA M7942 ROM Module (16-bit addressing only) MRV11-BA M8021 UV PROM-RAM (16-bit addressing only) MRV11-C M8048 PROM/ROM Module (18-bit addressing only) MSV11-B M7944 8 KB bus refreshed RAM (16-bit addressing only) MSV11-C M7955 32 KB RAM (18-bit addressing only) MSV11-D,E M8044/M8045 8 KB, 16 KB, 32 KB, 64 KB RAM (18-bit addressing only) MXV11-A M8047 Multifunction Module (18-bit addressing only on memory, the memory can be disbales see uNte #106) D. Options AAV11 A6001 D/A Converter (Use of BC1 for purposes other than BDAL18) ADV11 A012 A/D Converter (Use of BC1 for purposes other than BDAL18) BDV11 M8012 Bootstrap/Terminator (CS Revision E or earlier 18 bits only) DLV11-J M8043 Serial Line Interface (CS Rev. E or earlier incompatible with KDF11-A and KDF11-B) DRV11-B M7950 General Purpose DMA Interface (quad) (18-bit DMA only) KPV11-B,C M8016-YB,YC Power-fail/line-time clock/terminator (Termination for 18-bits only) KUV11 M8018 Writable Control Store (For use with KD11-F processor only) KWV11-A M7952 Programmable real-time clock (Use of BC1 for purposes other than BDAL18) Page 6 REV11 M9400 Terminator, DMA refresh, bootstrap (Bootstrap for use with KD11-F and KD11-HA processors only. Termination for 18-bits only. DMA refresh may be used in any system.) RKV11-D M7269 RK05 Controller Interface (16-bit DMA only) RLV11 M8013 RL01,2 Controller M8014 (18-bit DMA only, use of BC1 and BD1 for purposes other than BDAL18 and BDAL19) RXV21 M8029 RX02 Floppy Disk Interface (18-bit DMA only) TEV11 M9400-YB 120-Ohm Bus Terminator (Termination for 18-bits only) VSV11 M7064 Graphics Display (18-bit DMA only) E. Bus Cable-Cards M9400-YD Cable Connector (18-bit bus only) M9400-YE Cable Connector with 240-Ohm Terminators (18-bit bus only) M9401 Cable Connector (18-bit bus only)